800 VDC architecture

AI racks are outgrowing AC distribution. Higher DC voltage moves the same power with less current and fewer conversion stages.

AC vs 800 VDC

Conventional AC

  1. Medium-voltage AC grid
  2. Transformer
  3. UPS & AC switchgear
  4. Rack-level AC/DC conversion
  5. Compute

800 VDC

  1. Medium-voltage AC grid
  2. MVAC-to-DC conversion
  3. 800 VDC backbone
  4. Rack-level distribution
  5. AI compute

At equal power, higher voltage means lower current — which can reduce conductor size, resistive loss and footprint. Gains depend on the full design and are measured across the whole power chain.

Two paths

PathWhat it isFit
Hybrid / brownfieldAC-to-800 VDC power rack beside the compute load. Existing distribution stays.Fastest to pilot. Our starting point.
Native MVAC-to-800 VDCMedium-voltage AC converted to an 800 VDC backbone at the facility entrance.New builds. Where SSTs apply.

What an SST adds

A solid-state transformer uses power semiconductors and high-frequency conversion to transform voltage electronically. It can combine transformation, rectification, isolation, regulation and monitoring in one unit.

  • Modular, with power-flow control and DC output
  • Direct integration with storage and DC microgrids
  • Engineering challenges: MV insulation, thermal, fault containment, EMI, cost

800 VDC does not require an SST. We deploy with proven AC/DC modules today and co-develop SST subsystems with transformer OEMs.

Built to recognised standards

Designs align with Open Compute Project 800 VDC work and the applicable IEC, IEEE, NFPA and UL requirements for each product and site, with Energy Commission (Suruhanjaya Tenaga) requirements for installation in Malaysia.

800 VDC questions

What is 800 VDC power distribution?

800 VDC is a data-centre power architecture that distributes 800-volt direct current to AI compute racks instead of conventional AC. Converting medium-voltage AC to an 800 VDC backbone removes AC conversion stages between the grid and the rack. The Open Compute Project is standardising 800 VDC for AI data centres.

Why are AI data centres moving to 800 VDC?

AI racks are pushing power density beyond what rack-level AC distribution was designed for. At the same power, higher voltage means lower current, which can reduce conductor size, resistive losses and the number of conversion stages. Actual gains depend on the full design and must be measured across the whole power chain.

Does 800 VDC require a solid-state transformer?

No. 800 VDC can be built today with proven transformers and rectifiers or modular AC/DC power racks. Solid-state transformers (SSTs) are a later option for native medium-voltage-to-800 VDC conversion.

Can an existing data centre adopt 800 VDC without a rebuild?

Yes. In a hybrid or brownfield setup, a sidecar power rack such as Wubumi PowerRack converts AC to 800 VDC beside the compute load, while the rest of the facility stays on AC. This is the fastest way to pilot 800 VDC.

What is a solid-state transformer (SST)?

A solid-state transformer uses power semiconductors and high-frequency conversion to transform voltage electronically. It can combine transformation, rectification, isolation, regulation and monitoring, and can output DC directly for an 800 VDC backbone.

Which standards apply to 800 VDC installations in Malaysia?

Designs align with Open Compute Project 800 VDC work and the applicable IEC, IEEE, NFPA and UL requirements for each product and site. Installation in Malaysia must meet Energy Commission (Suruhanjaya Tenaga) requirements and is carried out with licensed electrical contractors.

Is your site ready for 800 VDC?

We compare AC, hybrid and native 800 VDC for your load and facility.

Book an assessmentAssessment scope